一二三

Linux中常见硬件设备的文件名
IDE硬盘    /dev/hd[a-d]SCSI/SATA/USB 硬盘 /dev/sd[a...
扫描右侧二维码阅读全文
13
2013/03

Linux中常见硬件设备的文件名

IDE硬盘    /dev/hd[a-d]

SCSI/SATA/USB 硬盘 /dev/sd[a-p]

 

详细列表:

 

  0             Unnamed devices (e.g. non-device mounts)
                  0 = reserved as null device number
                See block major 144, 145, 146 for expansion areas.

  1 char        Memory devices
                  1 = /dev/mem          Physical memory access
                  2 = /dev/kmem         Kernel virtual memory access
                  3 = /dev/null         Null device
                  4 = /dev/port         I/O port access
                  5 = /dev/zero         Null byte source
                  6 = /dev/core         OBSOLETE - replaced by /proc/kcore
                  7 = /dev/full         Returns ENOSPC on write
                  8 = /dev/random       Nondeterministic random number gen.
                  9 = /dev/urandom      Faster, less secure random number gen.
                 10 = /dev/aio          Asyncronous I/O notification interface
                 11 = /dev/kmsg         Writes to this come out as printk's
  1 block       RAM disk
                  0 = /dev/ram0         First RAM disk
                  1 = /dev/ram1         Second RAM disk
                    ...
                250 = /dev/initrd       Initial RAM disk {2.6}

                Older kernels had /dev/ramdisk (1, 1) here.
                /dev/initrd refers to a RAM disk which was preloaded
                by the boot loader; newer kernels use /dev/ram0 for
                the initrd.

  2 char        Pseudo-TTY masters
                  0 = /dev/ptyp0        First PTY master
                  1 = /dev/ptyp1        Second PTY master
                    ...
                255 = /dev/ptyef        256th PTY master

                Pseudo-tty's are named as follows:
                * Masters are "pty", slaves are "tty";
                * the fourth letter is one of pqrstuvwxyzabcde indicating
                  the 1st through 16th series of 16 pseudo-ttys each, and
                * the fifth letter is one of 0123456789abcdef indicating
                  the position within the series.

                These are the old-style (BSD) PTY devices; Unix98
                devices are on major 128 and above and use the PTY
                master multiplex (/dev/ptmx) to acquire a PTY on
                demand.

  2 block       Floppy disks
                  0 = /dev/fd0          Controller 0, drive 0, autodetect
                  1 = /dev/fd1          Controller 0, drive 1, autodetect
                  2 = /dev/fd2          Controller 0, drive 2, autodetect
                  3 = /dev/fd3          Controller 0, drive 3, autodetect
                128 = /dev/fd4          Controller 1, drive 0, autodetect
                129 = /dev/fd5          Controller 1, drive 1, autodetect
                130 = /dev/fd6          Controller 1, drive 2, autodetect
                131 = /dev/fd7          Controller 1, drive 3, autodetect

                To specify format, add to the autodetect device number:
                  0 = /dev/fd?          Autodetect format
                  4 = /dev/fd?d360      5.25"  360K in a 360K  drive(1)
                 20 = /dev/fd?h360      5.25"  360K in a 1200K drive(1)
                 48 = /dev/fd?h410      5.25"  410K in a 1200K drive
                 64 = /dev/fd?h420      5.25"  420K in a 1200K drive
                 24 = /dev/fd?h720      5.25"  720K in a 1200K drive
                 80 = /dev/fd?h880      5.25"  880K in a 1200K drive(1)
                  8 = /dev/fd?h1200     5.25" 1200K in a 1200K drive(1)
                 40 = /dev/fd?h1440     5.25" 1440K in a 1200K drive(1)
                 56 = /dev/fd?h1476     5.25" 1476K in a 1200K drive
                 72 = /dev/fd?h1494     5.25" 1494K in a 1200K drive
                 92 = /dev/fd?h1600     5.25" 1600K in a 1200K drive(1)

                 12 = /dev/fd?u360      3.5"   360K Double Density(2)
                 16 = /dev/fd?u720      3.5"   720K Double Density(1)
                120 = /dev/fd?u800      3.5"   800K Double Density(2)
                 52 = /dev/fd?u820      3.5"   820K Double Density
                 68 = /dev/fd?u830      3.5"   830K Double Density
                 84 = /dev/fd?u1040     3.5"  1040K Double Density(1)
                 88 = /dev/fd?u1120     3.5"  1120K Double Density(1)
                 28 = /dev/fd?u1440     3.5"  1440K High Density(1)
                124 = /dev/fd?u1600     3.5"  1600K High Density(1)
                 44 = /dev/fd?u1680     3.5"  1680K High Density(3)
                 60 = /dev/fd?u1722     3.5"  1722K High Density
                 76 = /dev/fd?u1743     3.5"  1743K High Density
                 96 = /dev/fd?u1760     3.5"  1760K High Density
                116 = /dev/fd?u1840     3.5"  1840K High Density(3)
                100 = /dev/fd?u1920     3.5"  1920K High Density(1)
                 32 = /dev/fd?u2880     3.5"  2880K Extra Density(1)
                104 = /dev/fd?u3200     3.5"  3200K Extra Density
                108 = /dev/fd?u3520     3.5"  3520K Extra Density
                112 = /dev/fd?u3840     3.5"  3840K Extra Density(1)

                 36 = /dev/fd?CompaQ    Compaq 2880K drive; obsolete?

                (1) Autodetectable format
                (2) Autodetectable format in a Double Density (720K) drive only
                (3) Autodetectable format in a High Density (1440K) drive only

                NOTE: The letter in the device name (d, q, h or u)
                signifies the type of drive: 5.25" Double Density (d),
                5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
                (any model, u).  The use of the capital letters D, H
                and E for the 3.5" models have been deprecated, since
                the drive type is insignificant for these devices.

  3 char        Pseudo-TTY slaves
                  0 = /dev/ttyp0        First PTY slave
                  1 = /dev/ttyp1        Second PTY slave
                    ...
                255 = /dev/ttyef        256th PTY slave

                These are the old-style (BSD) PTY devices; Unix98
                devices are on major 136 and above.

  3 block       First MFM, RLL and IDE hard disk/CD-ROM interface
                  0 = /dev/hda          Master: whole disk (or CD-ROM)
                 64 = /dev/hdb          Slave: whole disk (or CD-ROM)

                For partitions, add to the whole disk device number:
                  0 = /dev/hd?          Whole disk
                  1 = /dev/hd?1         First partition
                  2 = /dev/hd?2         Second partition
                    ...
                 63 = /dev/hd?63        63rd partition

                For Linux/i386, partitions 1-4 are the primary
                partitions, and 5 and above are logical partitions.
                Other versions of Linux use partitioning schemes
                appropriate to their respective architectures.

  4 char        TTY devices
                  0 = /dev/tty0         Current virtual console

                  1 = /dev/tty1         First virtual console
                    ...
                 63 = /dev/tty63        63rd virtual console
                 64 = /dev/ttyS0        First UART serial port
                    ...
                255 = /dev/ttyS191      192nd UART serial port

                UART serial ports refer to 8250/16450/16550 series devices.

                Older versions of the Linux kernel used this major
                number for BSD PTY devices.  As of Linux 2.1.115, this
                is no longer supported.  Use major numbers 2 and 3.

  4 block       Aliases for dynamically allocated major devices to be used
                when its not possible to create the real device nodes
                because the root filesystem is mounted read-only.

                  0 = /dev/root

  5 char        Alternate TTY devices
                  0 = /dev/tty          Current TTY device
                  1 = /dev/console      System console
                  2 = /dev/ptmx         PTY master multiplex
                 64 = /dev/cua0         Callout device for ttyS0
                    ...
                255 = /dev/cua191       Callout device for ttyS191

                (5,1) is /dev/console starting with Linux 2.1.71.  See
                the section on terminal devices for more information
                on /dev/console.

  6 char        Parallel printer devices
                  0 = /dev/lp0          Parallel printer on parport0
                  1 = /dev/lp1          Parallel printer on parport1
                    ...

                Current Linux kernels no longer have a fixed mapping
                between parallel ports and I/O addresses.  Instead,
                they are redirected through the parport multiplex layer.

  7 char        Virtual console capture devices
                  0 = /dev/vcs          Current vc text contents
                  1 = /dev/vcs1         tty1 text contents
                    ...
                 63 = /dev/vcs63        tty63 text contents
                128 = /dev/vcsa         Current vc text/attribute contents
                129 = /dev/vcsa1        tty1 text/attribute contents
                    ...
                191 = /dev/vcsa63       tty63 text/attribute contents

                NOTE: These devices permit both read and write access.

  7 block       Loopback devices
                  0 = /dev/loop0        First loopback device
                  1 = /dev/loop1        Second loopback device
                    ...

                The loopback devices are used to mount filesystems not
                associated with block devices.  The binding to the
                loopback devices is handled by mount(8) or losetup(8).

  8 block       SCSI disk devices (0-15)
                  0 = /dev/sda          First SCSI disk whole disk
                 16 = /dev/sdb          Second SCSI disk whole disk
                 32 = /dev/sdc          Third SCSI disk whole disk
                    ...
                240 = /dev/sdp          Sixteenth SCSI disk whole disk

                Partitions are handled in the same way as for IDE
                disks (see major number 3) except that the limit on
                partitions is 15.

  9 char        SCSI tape devices
                  0 = /dev/st0          First SCSI tape, mode 0
                  1 = /dev/st1          Second SCSI tape, mode 0
                    ...
                 32 = /dev/st0l         First SCSI tape, mode 1
                 33 = /dev/st1l         Second SCSI tape, mode 1
                    ...
                 64 = /dev/st0m         First SCSI tape, mode 2
                 65 = /dev/st1m         Second SCSI tape, mode 2
                    ...
                 96 = /dev/st0a         First SCSI tape, mode 3
                 97 = /dev/st1a         Second SCSI tape, mode 3
                      ...
                128 = /dev/nst0         First SCSI tape, mode 0, no rewind
                129 = /dev/nst1         Second SCSI tape, mode 0, no rewind
                    ...
                160 = /dev/nst0l        First SCSI tape, mode 1, no rewind
                161 = /dev/nst1l        Second SCSI tape, mode 1, no rewind
                    ...
                192 = /dev/nst0m        First SCSI tape, mode 2, no rewind
                193 = /dev/nst1m        Second SCSI tape, mode 2, no rewind
                    ...
                224 = /dev/nst0a        First SCSI tape, mode 3, no rewind
                225 = /dev/nst1a        Second SCSI tape, mode 3, no rewind
                    ...

                "No rewind" refers to the omission of the default
                automatic rewind on device close.  The MTREW or MTOFFL
                ioctl()'s can be used to rewind the tape regardless of
                the device used to access it.

  9 block       Metadisk (RAID) devices
                  0 = /dev/md0          First metadisk group
                  1 = /dev/md1          Second metadisk group
                    ...

                The metadisk driver is used to span a
                filesystem across multiple physical disks.

 10 char        Non-serial mice, misc features
                  0 = /dev/logibm       Logitech bus mouse
                  1 = /dev/psaux        PS/2-style mouse port
                  2 = /dev/inportbm     Microsoft Inport bus mouse
                  3 = /dev/atibm        ATI XL bus mouse
                  4 = /dev/jbm          J-mouse
                  4 = /dev/amigamouse   Amiga mouse (68k/Amiga)
                  5 = /dev/atarimouse   Atari mouse
                  6 = /dev/sunmouse     Sun mouse
                  7 = /dev/amigamouse1  Second Amiga mouse
                  8 = /dev/smouse       Simple serial mouse driver
                  9 = /dev/pc110pad     IBM PC-110 digitizer pad
                 10 = /dev/adbmouse     Apple Desktop Bus mouse
                 11 = /dev/vrtpanel     Vr41xx embedded touch panel
                 13 = /dev/vpcmouse     Connectix Virtual PC Mouse
                 14 = /dev/touchscreen/ucb1x00  UCB 1x00 touchscreen
                 15 = /dev/touchscreen/mk712    MK712 touchscreen
                128 = /dev/beep         Fancy beep device
                129 = /dev/modreq       Kernel module load request {2.6}
                130 = /dev/watchdog     Watchdog timer port
                131 = /dev/temperature  Machine internal temperature
                132 = /dev/hwtrap       Hardware fault trap
                133 = /dev/exttrp       External device trap
                134 = /dev/apm_bios     Advanced Power Management BIOS
                135 = /dev/rtc          Real Time Clock
                139 = /dev/openprom     SPARC OpenBoot PROM
                140 = /dev/relay8       Berkshire Products Octal relay card
                141 = /dev/relay16      Berkshire Products ISO-16 relay card
                142 = /dev/msr          x86 model-specific registers {2.6}
                143 = /dev/pciconf      PCI configuration space
                144 = /dev/nvram        Non-volatile configuration RAM
                145 = /dev/hfmodem      Soundcard shortwave modem control {2.6}
                146 = /dev/graphics     Linux/SGI graphics device
                147 = /dev/opengl       Linux/SGI OpenGL pipe
                148 = /dev/gfx          Linux/SGI graphics effects device
                149 = /dev/input/mouse  Linux/SGI Irix emulation mouse
                150 = /dev/input/keyboard Linux/SGI Irix emulation keyboard
                151 = /dev/led          Front panel LEDs
                152 = /dev/kpoll        Kernel Poll Driver
                153 = /dev/mergemem     Memory merge device
                154 = /dev/pmu          Macintosh PowerBook power manager
                155 = /dev/isictl       MultiTech ISICom serial control
                156 = /dev/lcd          Front panel LCD display
                157 = /dev/ac           Applicom Intl Profibus card
                158 = /dev/nwbutton     Netwinder external button
                159 = /dev/nwdebug      Netwinder debug interface
                160 = /dev/nwflash      Netwinder flash memory
                161 = /dev/userdma      User-space DMA access
                162 = /dev/smbus        System Management Bus
                163 = /dev/lik          Logitech Internet Keyboard
                164 = /dev/ipmo         Intel Intelligent Platform Management
                165 = /dev/vmmon        VMWare virtual machine monitor
                166 = /dev/i2o/ctl      I2O configuration manager
                167 = /dev/specialix_sxctl Specialix serial control
                168 = /dev/tcldrv       Technology Concepts serial control
                169 = /dev/specialix_rioctl Specialix RIO serial control
                170 = /dev/thinkpad/thinkpad    IBM Thinkpad devices
                171 = /dev/srripc       QNX4 API IPC manager
                172 = /dev/usemaclone   Semaphore clone device
                173 = /dev/ipmikcs      Intelligent Platform Management
                174 = /dev/uctrl        SPARCbook 3 microcontroller
                175 = /dev/agpgart      AGP Graphics Address Remapping Table
                176 = /dev/gtrsc        Gorgy Timing radio clock
                177 = /dev/cbm          Serial CBM bus
                178 = /dev/jsflash      JavaStation OS flash SIMM
                179 = /dev/xsvc         High-speed shared-mem/semaphore service
                180 = /dev/vrbuttons    Vr41xx button input device
                181 = /dev/toshiba      Toshiba laptop SMM support
                182 = /dev/perfctr      Performance-monitoring counters
                183 = /dev/hwrng        Generic random number generator
                184 = /dev/cpu/microcode CPU microcode update interface
                186 = /dev/atomicps     Atomic shapshot of process state data
                187 = /dev/irnet        IrNET device
                188 = /dev/smbusbios    SMBus BIOS
                189 = /dev/ussp_ctl     User space serial port control
                190 = /dev/crash        Mission Critical Linux crash dump facility
                191 = /dev/pcl181       <information missing>
                192 = /dev/nas_xbus     NAS xbus LCD/buttons access
                193 = /dev/d7s          SPARC 7-segment display
                194 = /dev/zkshim       Zero-Knowledge network shim control
                195 = /dev/elographics/e2201    Elographics touchscreen E271-2201
                198 = /dev/sexec        Signed executable interface
                199 = /dev/scanners/cuecat :CueCat barcode scanner
                200 = /dev/net/tun      TAP/TUN network device
                201 = /dev/button/gulpb Transmeta GULP-B buttons
                202 = /dev/emd/ctl      Enhanced Metadisk RAID (EMD) control
                204 = /dev/video/em8300         EM8300 DVD decoder control
                205 = /dev/video/em8300_mv      EM8300 DVD decoder video
                206 = /dev/video/em8300_ma      EM8300 DVD decoder audio
                207 = /dev/video/em8300_sp      EM8300 DVD decoder subpicture
                208 = /dev/compaq/cpqphpc       Compaq PCI Hot Plug Controller
                209 = /dev/compaq/cpqrid        Compaq Remote Insight Driver
                210 = /dev/impi/bt      IMPI coprocessor block transfer 
                211 = /dev/impi/smic    IMPI coprocessor stream interface
                212 = /dev/watchdogs/0  First watchdog device
                213 = /dev/watchdogs/1  Second watchdog device
                214 = /dev/watchdogs/2  Third watchdog device
                215 = /dev/watchdogs/3  Fourth watchdog device
                216 = /dev/fujitsu/apanel       Fujitsu/Siemens application panel
                217 = /dev/ni/natmotn           National Instruments Motion
                218 = /dev/kchuid       Inter-process chuid control
                219 = /dev/modems/mwave MWave modem firmware upload
                220 = /dev/mptctl       Message passing technology (MPT) control
                221 = /dev/mvista/hssdsi        Montavista PICMG hot swap system driver
                222 = /dev/mvista/hasi          Montavista PICMG high availability
                223 = /dev/input/uinput         User level driver support for input
                224 = /dev/tpm          TCPA TPM driver
                225 = /dev/pps          Pulse Per Second driver
                226 = /dev/systrace     Systrace device
                227 = /dev/mcelog       X86_64 Machine Check Exception driver
                228 = /dev/hpet         HPET driver
                229 = /dev/fuse         Fuse (virtual filesystem in user-space)
                230 = /dev/midishare    MidiShare driver
                240-254                 Reserved for local use
                255                     Reserved for MISC_DYNAMIC_MINOR

 11 char        Raw keyboard device     (Linux/SPARC only)
                  0 = /dev/kbd          Raw keyboard device

 11 char        Serial Mux device       (Linux/PA-RISC only)
                  0 = /dev/ttyB0        First mux port
                  1 = /dev/ttyB1        Second mux port
                    ...

 11 block       SCSI CD-ROM devices
                  0 = /dev/scd0         First SCSI CD-ROM
                  1 = /dev/scd1         Second SCSI CD-ROM
                    ...

                The prefix /dev/sr (instead of /dev/scd) has been deprecated.

 12 char        QIC-02 tape
                  2 = /dev/ntpqic11     QIC-11, no rewind-on-close
                  3 = /dev/tpqic11      QIC-11, rewind-on-close
                  4 = /dev/ntpqic24     QIC-24, no rewind-on-close
                  5 = /dev/tpqic24      QIC-24, rewind-on-close
                  6 = /dev/ntpqic120    QIC-120, no rewind-on-close
                  7 = /dev/tpqic120     QIC-120, rewind-on-close
                  8 = /dev/ntpqic150    QIC-150, no rewind-on-close
                  9 = /dev/tpqic150     QIC-150, rewind-on-close

                The device names specified are proposed -- if there
                are "standard" names for these devices, please let me know.

 12 block       MSCDEX CD-ROM callback support {2.6}
                  0 = /dev/dos_cd0      First MSCDEX CD-ROM
                  1 = /dev/dos_cd1      Second MSCDEX CD-ROM
                    ...

 13 char        Input core
                  0 = /dev/input/js0    First joystick
                  1 = /dev/input/js1    Second joystick
                    ...
                 32 = /dev/input/mouse0 First mouse
                 33 = /dev/input/mouse1 Second mouse
                    ...
                 63 = /dev/input/mice   Unified mouse
                 64 = /dev/input/event0 First event queue
                 65 = /dev/input/event1 Second event queue
                    ...

                Each device type has 5 bits (32 minors).

 13 block       8-bit MFM/RLL/IDE controller
                  0 = /dev/xda          First XT disk whole disk
                 64 = /dev/xdb          Second XT disk whole disk

                Partitions are handled in the same way as IDE disks
                (see major number 3).

 14 char        Open Sound System (OSS)
                  0 = /dev/mixer        Mixer control
                  1 = /dev/sequencer    Audio sequencer
                  2 = /dev/midi00       First MIDI port
                  3 = /dev/dsp          Digital audio
                  4 = /dev/audio        Sun-compatible digital audio
                  6 = /dev/sndstat      Sound card status information {2.6}
                  7 = /dev/audioctl     SPARC audio control device
                  8 = /dev/sequencer2   Sequencer -- alternate device
                 16 = /dev/mixer1       Second soundcard mixer control
                 17 = /dev/patmgr0      Sequencer patch manager
                 18 = /dev/midi01       Second MIDI port
                 19 = /dev/dsp1         Second soundcard digital audio
                 20 = /dev/audio1       Second soundcard Sun digital audio
                 33 = /dev/patmgr1      Sequencer patch manager
                 34 = /dev/midi02       Third MIDI port
                 50 = /dev/midi03       Fourth MIDI port
 14 block       BIOS harddrive callback support {2.6}
                  0 = /dev/dos_hda      First BIOS harddrive whole disk
                 64 = /dev/dos_hdb      Second BIOS harddrive whole disk
                128 = /dev/dos_hdc      Third BIOS harddrive whole disk
                192 = /dev/dos_hdd      Fourth BIOS harddrive whole disk

                Partitions are handled in the same way as IDE disks
                (see major number 3).

 15 char        Joystick
                  0 = /dev/js0          First analog joystick
                  1 = /dev/js1          Second analog joystick
                    ...
                128 = /dev/djs0         First digital joystick
                129 = /dev/djs1         Second digital joystick
                    ...
 15 block       Sony CDU-31A/CDU-33A CD-ROM
                  0 = /dev/sonycd       Sony CDU-31a CD-ROM

 16 char        Non-SCSI scanners
                  0 = /dev/gs4500       Genius 4500 handheld scanner
 16 block       GoldStar CD-ROM
                  0 = /dev/gscd         GoldStar CD-ROM

 17 char        Chase serial card
                  0 = /dev/ttyH0        First Chase port
                  1 = /dev/ttyH1        Second Chase port
                    ...
 17 block       Optics Storage CD-ROM
                  0 = /dev/optcd        Optics Storage CD-ROM

 18 char        Chase serial card - alternate devices
                  0 = /dev/cuh0         Callout device for ttyH0
                  1 = /dev/cuh1         Callout device for ttyH1
                    ...
 18 block       Sanyo CD-ROM
                  0 = /dev/sjcd         Sanyo CD-ROM

 19 char        Cyclades serial card
                  0 = /dev/ttyC0        First Cyclades port
                    ...
                 31 = /dev/ttyC31       32nd Cyclades port
 19 block       "Double" compressed disk
                  0 = /dev/double0      First compressed disk
                    ...
                  7 = /dev/double7      Eighth compressed disk
                128 = /dev/cdouble0     Mirror of first compressed disk
                    ...
                135 = /dev/cdouble7     Mirror of eighth compressed disk

                See the Double documentation for the meaning of the
                mirror devices.

 20 char        Cyclades serial card - alternate devices
                  0 = /dev/cub0         Callout device for ttyC0
                    ...
                 31 = /dev/cub31        Callout device for ttyC31
 20 block       Hitachi CD-ROM (under development)
                  0 = /dev/hitcd        Hitachi CD-ROM

 21 char        Generic SCSI access
                  0 = /dev/sg0          First generic SCSI device
                  1 = /dev/sg1          Second generic SCSI device
                    ...

                Most distributions name these /dev/sga, /dev/sgb...;
                this sets an unnecessary limit of 26 SCSI devices in
                the system and is counter to standard Linux
                device-naming practice.

 21 block       Acorn MFM hard drive interface
                  0 = /dev/mfma         First MFM drive whole disk
                 64 = /dev/mfmb         Second MFM drive whole disk

                This device is used on the ARM-based Acorn RiscPC.
                Partitions are handled the same way as for IDE disks
                (see major number 3). 

 22 char        Digiboard serial card
                  0 = /dev/ttyD0        First Digiboard port
                  1 = /dev/ttyD1        Second Digiboard port
                    ...
 22 block       Second IDE hard disk/CD-ROM interface
                  0 = /dev/hdc          Master: whole disk (or CD-ROM)
                 64 = /dev/hdd          Slave: whole disk (or CD-ROM)

                Partitions are handled the same way as for the first
                interface (see major number 3).

 23 char        Digiboard serial card - alternate devices
                  0 = /dev/cud0         Callout device for ttyD0
                  1 = /dev/cud1         Callout device for ttyD1
                      ...
 23 block       Mitsumi proprietary CD-ROM
                  0 = /dev/mcd          Mitsumi CD-ROM

 24 char        Stallion serial card
                  0 = /dev/ttyE0        Stallion port 0 card 0
                  1 = /dev/ttyE1        Stallion port 1 card 0
                    ...
                 64 = /dev/ttyE64       Stallion port 0 card 1
                 65 = /dev/ttyE65       Stallion port 1 card 1
                      ...
                128 = /dev/ttyE128      Stallion port 0 card 2
                129 = /dev/ttyE129      Stallion port 1 card 2
                    ...
                192 = /dev/ttyE192      Stallion port 0 card 3
                193 = /dev/ttyE193      Stallion port 1 card 3
                    ...
 24 block       Sony CDU-535 CD-ROM
                  0 = /dev/cdu535       Sony CDU-535 CD-ROM

 25 char        Stallion serial card - alternate devices
                  0 = /dev/cue0         Callout device for ttyE0
                  1 = /dev/cue1         Callout device for ttyE1
                    ...
                 64 = /dev/cue64        Callout device for ttyE64
                 65 = /dev/cue65        Callout device for ttyE65
                    ...
                128 = /dev/cue128       Callout device for ttyE128
                129 = /dev/cue129       Callout device for ttyE129
                    ...
                192 = /dev/cue192       Callout device for ttyE192
                193 = /dev/cue193       Callout device for ttyE193
                      ...
 25 block       First Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd0       Panasonic CD-ROM controller 0 unit 0
                  1 = /dev/sbpcd1       Panasonic CD-ROM controller 0 unit 1
                  2 = /dev/sbpcd2       Panasonic CD-ROM controller 0 unit 2
                  3 = /dev/sbpcd3       Panasonic CD-ROM controller 0 unit 3

 26 char        Quanta WinVision frame grabber {2.6}
                  0 = /dev/wvisfgrab    Quanta WinVision frame grabber
 26 block       Second Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd4       Panasonic CD-ROM controller 1 unit 0
                  1 = /dev/sbpcd5       Panasonic CD-ROM controller 1 unit 1
                  2 = /dev/sbpcd6       Panasonic CD-ROM controller 1 unit 2
                  3 = /dev/sbpcd7       Panasonic CD-ROM controller 1 unit 3

 27 char        QIC-117 tape
                  0 = /dev/qft0         Unit 0, rewind-on-close
                  1 = /dev/qft1         Unit 1, rewind-on-close
                  2 = /dev/qft2         Unit 2, rewind-on-close
                  3 = /dev/qft3         Unit 3, rewind-on-close
                  4 = /dev/nqft0        Unit 0, no rewind-on-close
                  5 = /dev/nqft1        Unit 1, no rewind-on-close
                  6 = /dev/nqft2        Unit 2, no rewind-on-close
                  7 = /dev/nqft3        Unit 3, no rewind-on-close
                 16 = /dev/zqft0        Unit 0, rewind-on-close, compression
                 17 = /dev/zqft1        Unit 1, rewind-on-close, compression
                 18 = /dev/zqft2        Unit 2, rewind-on-close, compression
                 19 = /dev/zqft3        Unit 3, rewind-on-close, compression
                 20 = /dev/nzqft0       Unit 0, no rewind-on-close, compression
                 21 = /dev/nzqft1       Unit 1, no rewind-on-close, compression
                 22 = /dev/nzqft2       Unit 2, no rewind-on-close, compression
                 23 = /dev/nzqft3       Unit 3, no rewind-on-close, compression
                 32 = /dev/rawqft0      Unit 0, rewind-on-close, no file marks
                 33 = /dev/rawqft1      Unit 1, rewind-on-close, no file marks
                 34 = /dev/rawqft2      Unit 2, rewind-on-close, no file marks
                 35 = /dev/rawqft3      Unit 3, rewind-on-close, no file marks
                 36 = /dev/nrawqft0     Unit 0, no rewind-on-close, no file marks
                 37 = /dev/nrawqft1     Unit 1, no rewind-on-close, no file marks
                 38 = /dev/nrawqft2     Unit 2, no rewind-on-close, no file marks
                 39 = /dev/nrawqft3     Unit 3, no rewind-on-close, no file marks
 27 block       Third Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd8       Panasonic CD-ROM controller 2 unit 0
                  1 = /dev/sbpcd9       Panasonic CD-ROM controller 2 unit 1
                  2 = /dev/sbpcd10      Panasonic CD-ROM controller 2 unit 2
                  3 = /dev/sbpcd11      Panasonic CD-ROM controller 2 unit 3

 28 char        Stallion serial card - card programming
                  0 = /dev/staliomem0   First Stallion card I/O memory
                  1 = /dev/staliomem1   Second Stallion card I/O memory
                  2 = /dev/staliomem2   Third Stallion card I/O memory
                  3 = /dev/staliomem3   Fourth Stallion card I/O memory
 28 char        Atari SLM ACSI laser printer (68k/Atari)
                  0 = /dev/slm0         First SLM laser printer
                  1 = /dev/slm1         Second SLM laser printer
                    ...
 28 block       Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
                  0 = /dev/sbpcd12      Panasonic CD-ROM controller 3 unit 0
                  1 = /dev/sbpcd13      Panasonic CD-ROM controller 3 unit 1
                  2 = /dev/sbpcd14      Panasonic CD-ROM controller 3 unit 2
                  3 = /dev/sbpcd15      Panasonic CD-ROM controller 3 unit 3
 28 block       ACSI disk (68k/Atari)
                  0 = /dev/ada          First ACSI disk whole disk
                 16 = /dev/adb          Second ACSI disk whole disk
                 32 = /dev/adc          Third ACSI disk whole disk
                    ...
                240 = /dev/adp          16th ACSI disk whole disk
Last modification:August 30th, 2016 at 11:59 am

One comment

  1. 初四

    怎么不翻译过来啊

Leave a Comment